2 Inch 850nm Infrared LED Pod Light - Pro Series 3.0 | Spot or Flood (12W)
2 Inch 850nm Infrared LED Pod Light - Pro Series 3.0 | Spot or Flood (12W)

Customers Also Viewed
Infrared Pod Light – Stealth Illumination for Night Vision.
Engineered to enhance night vision systems and covert visibility, the Black Oak LED 2″ Infrared Pod Light emits powerful 850 nm infrared illumination that is invisible to the naked eye but dramatically improves what your night vision optics and cameras can see. Whether you’re mounting on a vehicle, UTV, boat, or tactical rig, this compact pod delivers a stealthy, focused IR beam that lights up terrain and targets without revealing your position.
Built on the rugged Pro Series 3.0 platform, this infrared pod combines real IR LEDs (not filters) with a durable, IP69K-rated housing designed to withstand water, dust, and harsh environments. Complete with mounting brackets, wiring harness, and easy-install hardware, it’s a versatile lighting upgrade for night hunting, security patrols, surveillance, or any low-light mission where enhanced visibility matters most.
Features
-
Lifetime Warranty
-
IP69K Rated Housing – sealed against salt, spray, and sun
-
Premium CREE and OSRAM LED chips
-
316 Stainless Steel Mounting Brackets
-
Ceramic-Coated Finish for UV and Corrosion Protection
-
Military-Grade Breather to Prevent Moisture Build-Up
-
Includes Wiring Harness (14 gauge wire, fuse, relay, switch)
-
Premium Lexan Lens – Won’t Fade or Yellow Over Time
In the Box
- (1) Pod Light
- Stainless Mounting Brackets and Hardware
- Complete Wiring Harness

Premium Lexan Lens + IP69K Sealed Housing
Each light is built with an optical-grade Lexan lens—twice as strong as glass and engineered to resist fading or yellowing—paired with an IP69K-rated housing that blocks out salt, spray, sun, and high-pressure water. The result is a crystal-clear, fully sealed system designed to perform for years in the harshest marine or off-road environments.
Premium OSRAM or CREE LEDs
Powered by premium OSRAM or CREE chips for maximum brightness and clarity. Each LED is tuned for efficiency and longevity — delivering crisp, high-output performance designed to last a lifetime.
Complete Wiring Harness Included
Every light bar comes ready to install with a pre-terminated 12-gauge wiring harness, inline fuse, relay, and switch — plus heavy-duty stainless mounting brackets for a secure, professional-grade setup right out of the box.
Ceramic-Coated, Hydrex-Sealed Construction
Finished with a corrosion-resistant ceramic coating and sealed with our Hydrex gasket system for true IP69K performance. 316 stainless bolt-in mounts provide unmatched strength and durability in saltwater or off-road environments.
Precision Beam Patterns
Choose from spot, flood, or combo configurations for the perfect lighting spread. Our advanced reflector design ensures maximum throw distance and balanced side illumination for total visibility in any situation.
Lifetime Warranty
Enjoy complete peace of mind knowing your light is backed by our industry-leading lifetime warranty. We stand behind every product we build — if it ever fails due to workmanship or materials, we’ll repair or replace it, guaranteed.
Pro Tip - Pick Up our 2 piece connect cable or 4 piece connect cable to easily connect 2-4 pods to a single wire harness!
| Power & Performance | |
|---|---|
| Total Wattage | 12 |
| Total Amp Draw | 1.1 |
| Operating Voltage | 10 - 30V DC |
| Lumens | N/A |
| Color Temperature | 850 |
| LED Diode Quantity | 4 |
| LED Chip | Osram |
| Beam Pattern |
Spot or Flood |
| Beam Angle |
15° Spot 45° Flood |
| Mode | On/Off |
| Dimmable | Yes! (Separate Dimming Module Required, Not Included) |
| Durability & Lifespan | |
| Life Expectancy | 50,000 Hours |
| Operating Temp | -40° to 145° F -40° to 62° C |
| Waterproof Rating | IP69K |
| Warranty | Limited Lifetime |
| Guarantee | 30 Day Money Back |
| Wiring & Installation | |
| Cord Lead From Light | 16" |
| Wire Harness Included? | Yes |
| Wire Harness Length | 12' |
| Wire Gauge | 16 AWG |
| Fuse Size | 5 Amp |
| Connector Type | 2 Pin Deutsch |
| Hole Size for Switch | 3/4" |
| Mounting Bolt Size | 5/16" |
| General | |
| Weight | 1.4 Lbs |
| SKU - Flood | 2IRF-POD3OS |
| SKU - Spot | 2IRS-POD3OS |

Here is a link to the instructions.
Frequently Asked Questions:
Q: What’s the difference between “Spot” and “Flood” beam patterns?
A: Spot beams produce a narrow, long-range beam that throws light far down the road — ideal for driving or long-distance visibility. Flood beams cast a wider spread of light to illuminate a broader area close to the fixture — great for off-road work, site lighting, or illuminating surroundings.
Q: What does “IP69K rated” mean, and why is that important?
A: IP69K is one of the highest waterproof/dust-resistance ratings available. The first digit (“6”) indicates full protection against dust and fine particles; the “9K” means the light can withstand high-pressure, high-temperature water spray (e.g. pressure washing or heavy rain) without leaking or failing — making the pod safe for marine, off-road, or harsh-weather use.
Q: Is all mounting hardware included, or do I need to buy extra parts?
A: The pod light ships with stainless steel mounting brackets and all necessary hardware — plus a complete wiring harness (with fuse, relay, and switch). So you don’t need to purchase additional mounts or wiring kits (unless you want custom mounting).
Q: What environments or applications are these pods suitable for?
A: With a fully sealed, IP69K-rated housing, rugged stainless-steel mounts, and premium LEDs, these pods are designed for demanding environments — like off-road vehicles, boats, work trucks, and industrial equipment. They handle dust, water spray, vibration, and harsh elements reliably.
Q: How do I decide whether to get Spot or Flood (or both) for my needs?
A: If you need a focused, long-range beam (for road driving, spotting obstacles far ahead, or long-distance visibility), go with Spot. If you need to illuminate a wide area nearby (work sites, surroundings, off-road trail lights, general area light), Flood is the better choice. Many users mix both depending on how they use their rig.














